H3C SOHO IE4300, Command Reference Manual

Page: 2858 / 3296

47
[Sysname-nqa-admin-test-ftp] password simple ftpuser
# Set the FTP login password to ftpuser in FTP template view.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] password simple ftpuser
Related commands
operation
username
probe count
Use
probe count
to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
In an UDP tracert operation, the NQA client sends three probe packets to each hop along the path.
In other types of operations, the NQA client performs one probe to the destination per operation.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
ICMP jitter/UDP jitter operation view
Predefined user roles
network-admin
Parameters
times
: Specifies the probe times.
•
For the UDP tracert operation, this argument specifies the times of probes to each hop along
the path. The value range for this argument is 1 to 10.
•
For other types of operations, this argument specifies the times of probes to the destination per
operation. The value range for this argument is 1 to 15.
Usage guidelines
The following describes how NQA performs different types of operations:
•
A TCP or DLSw operation sets up a connection.
•
An ICMP jitter or UDP jitter operation sends a number of probe packets. The number of probe
packets is set by using the
probe packet-number
command.
•
An FTP operation uploads or downloads a file.
•
An HTTP operation gets a Web page.
•
A DHCP operation gets an IP address through DHCP.
•
A DNS operation translates a domain name to an IP address.