H3C SOHO IE4300, Command Reference Manual

Page: 1370 / 3296

1
OSPFv3 commands
abr-summary (OSPFv3 area view)
Use
abr-summary
to configure route summarization on an ABR.
Use
undo abr-summary
to remove the configuration.
Syntax
abr-summary ipv6-address prefix-length [ not-advertise ] [ cost
cost-value ]
undo abr-summary ipv6-address prefix-length
Default
Route summarization is not configured on an ABR.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
ipv6-address
: Specifies the destination IPv6 address of the summary route.
prefix-length
: Specifies the prefix length of the destination IPv6 address, in the range of 0 to
128. This argument specifies the number of consecutive 1s of the prefix, which defines the network
ID.
not-advertise
: Specifies not to advertise the summary IPv6 route. If you do not specify this
keyword, the command advertises the IPv6 summary route.
cost cost-value
: Specifies the cost of the summary route, in the range of 1 to 16777215. The
default cost is the largest cost value among routes that are summarized.
Usage guidelines
This command applies only to an ABR to summarize multiple contiguous networks into one network.
To enable ABR to advertise specific routes that have been summarized, use the undo
abr-summary
command.
Examples
# Summarize networks 2000:1:1:1::/64 and 2000:1:1:2::/64 in Area 1 into 2000:1:1::/48.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] abr-summary 2000:1:1:: 48
area
Use area to create an OSPFv3 area and enter OSPFv3 area view.
Use
undo area
to remove an OSPFv3 area.