H3C SOHO IE4300, Command Reference Manual

Page: 2109 / 3296

12
Use
undo web-auth max-user
to disable online detection of Web authentication users.
Syntax
web-auth offline-detect interval interval
undo web-auth offline-detect interval
Default
Online detection of Web authentication users is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
interval
: Specifies the Web authentication user detection interval, in the range of 60 to 65535
seconds.
User guidelines
This feature enables the device to detect packets of an online user at the specified detection
interval. If no packet from the user is received within the interval, the device logs out the user and
notifies the RADIUS server to stop accounting for the user.
To prevent the device from mistakenly logging out users, set the detection interval to be the same
as the aging time of MAC address entries.
Examples
# On GigabitEthernet 1/0/1, enable online detection of Web authentication users and set the
detection interval to 3600 seconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] web-auth offline-detect interval 3600
web-auth proxy port
Use
web-auth proxy port
to add the port number of a Web proxy server, so that HTTP
requests forwarded by the Web proxy server trigger Web authentication.
Use
undo web-auth proxy port
to delete one or all Web proxy server port numbers.
Syntax
web-auth proxy port port number
undo web-auth proxy port { port-number | all }
Default
No Web proxy server port numbers are configured on the device.
Views
System view
Predefined user roles
network-admin
Parameters
port number
: Specifies a Web proxy server TCP port number, in the range of 1 to 65535.