Omron CS1W-MCH71 -, Operation Manual

Page: 658 / 717

613
Slave Modules
Section 10-2
Input variables
Address Bit Symbol Name Description
IW0030
Word 1 0 RDY1 Ready
(Word 1) Indicates the result of self-diagnosis for the module.
ON: Normal
OFF: Abnormal
1 Not used
2 MONSEL1 Monitor parameters Indicates that the parameters are being monitored.
3 Not used
4 PACK1 Parameter settings
normal Indicates that the setting operation was completed nor-
mally. Stays ON while the setting signal is ON.
5 PNACK1 Parameter setting error Indicates that the setting operation caused an error. Stays
ON while the setting signal is ON.
6, 7 Not used
8 MOV1L Positioning Indicates that the positioning operation is being performed.
9 JOG1L JOG operation Indicates that the JOG operation is being performed.
10 ZRN1L Zero point return Indicates that the zero point return operation is being per-
formed.
11 Not used
12 OVER1 Overheat input status Indicates the status of the external overheat input. (External
input terminal)
13 TIMING1 Magnetic excitation
timing input status Indicates the status of the external magnetic excitation tim-
ing input. (External input terminal)
14 ZRN1 Zero point signal input
status Indicates the status of the external zero point signal input.
(External input terminal)
15 IN1 General-purpose input
status Indicates the status of the external general-purpose input.
(External input terminal)
IW0031
Word 2 0 RDY2 Ready
(Word 2) Indicates the result of self-diagnosis for the module.
ON: Normal
OFF: Abnormal
1 Not used
2 MONSEL2 Monitor parameters Indicates that the parameters are being monitored.
3 Not used
4 PACK2 Parameter settings
normal Indicates that the setting operation was completed nor-
mally. Stays ON while the setting signal is ON.
5 PNACK2 Parameter setting error Indicates that the setting operation caused an error. Stays
ON while the setting signal is ON.
6, 7 Not used
8 MOV2L Positioning Indicates that the positioning operation is being performed.
9 JOG2L JOG operation Indicates that the JOG operation is being performed.
10 ZRN2L Zero point return Indicates that the zero point return operation is being per-
formed.
11 Not used
12 OVER2 Overheat input status Indicates the status of the external overheat input. (External
input terminal)
13 TIMING2 Magnetic excitation
timing input status Indicates the status of the external magnetic excitation tim-
ing input. (External input terminal)
14 ZRN2 Zero point signal input
status Indicates the status of the external zero point signal input.
(External input terminal)
15 IN2 General-purpose input
status Indicates the status of the external general-purpose input.
(External input terminal)