Omron CS1W-MCH71 -, Operation Manual

Page: 131 / 717

86
System Parameters
Section 4-2
Explanation
Sets the maximum speed on machine's side when operating with JOG, STEP
operations, and DATUM command.
The max speed is limited by (32767 command unit/unit scan).
Note The setting of this parameter limits the speed changed by override.
Explanation
Sets the speed (a value with override 100%) on machine's side for when oper-
ating with MOVE, MOVEI commands.
The max speed is limited by (32767 command unit/unit scan).
Note Speed can be changed during operation using override.
Explanation
Sets the speed (a value with override 100%) on machine's side for when per-
forming JOG and STEP operations.
The max speed is limited by (32767 command unit/unit scan).
Note Speed can be changed during operation using override.
Explanation
Sets the time required to accelerate from zero to max. rapid feed rate.
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA02 55C1h +
(AA * 14h) Max. manual feed rate Data Command unit/
min Yes
Data configuration Setting range
00000001 to 7FFFFFFF Hex
(1 to 2147483647) Initial value
00002710 (10000)
31 00
Max. manual feed rate
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA03 55C2h +
(AA * 14h) Rapid feed rate Data Command unit/
min Yes
Data configuration Setting range
00000001 to 7FFFFFFF Hex
(1 to 2147483647) Initial value
00002710 (10000)
31 00
Rapid feed rate
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA04 55C3h +
(AA * 14h) Manual feed rate Data Command unit/
min Yes
Data configuration Setting range
00000001 to 7FFFFFFF Hex
(1 to 2147483647) Initial value
00002710 (10000)
31 00
Manual feed rate
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA05 55C4h +
(AA * 14h) Rapid feed acceleration time Data ms Yes
Data configuration Setting range
00000000 to 0000EA60 Hex
(0 to 60000) Initial value
00000064 (100)
31 00
Acceleration time