Omron CS1W-MCH71 -, Operation Manual

Page: 452 / 717

407
Allocations for the CPU Unit
Section 7-3
For details on bank and file memory for the EM Area, refer to the SYSMAC
CS Series Programmable Controllers Operation Manual (W339) or the SYS-
MAC CJ Series Programmable Controllers Operation Manual (W393).
• First address (word m+5)
When CIO (0001), WR (0002), DM (0003), or EM area (0004) is specified
for the operation data area in the area type specification (word m+4 bit08
to 14), the first address is to be specified.
Set the first address in hexadecimal (Hex). The setting range varies de-
pending on the setting of the No. of transferred words (word m+4 bit00 to
07).
When setting the No. of transferred words to its maximum “A0 Hex (160)”,
the setting ranges are as follows:
CIO area: 0000 to 175F Hex (0 to 5983)
WR area: 0000 to 015F Hex (0 to 351)
DM area: 0000 to 7F5F Hex (0 to 32607)
EM area: 0000 to 7F5F Hex (0 to 32607)
When “Does not use the general I/O area (00)” is specified in the area type
specification (word m+4 bit 08 to 14), this setting is not necessary.
Setting example
Ex1:
0Ahex (10) words of the custom I/O area starting from word 4E20Hex (20000)
in EM area of PLC are transferred to input variables of MC Unit (IW0B00~).
Ex2:
The custom I/O area is allocated to the memory area of PLC as shown below:
m+4 840A
(PORT_A)
m+5 4E20
General I/O A
On PLC Direction On MC Unit
PORT_A EM 20000 to 20009
→
IW 0B00 to 0B09
m+4 010A
(PORT_A)
m+5 0000
8164
(PORT_B)
m+7 1388
8205
(PORT_C)
m+9 00C8
84A0
(PORT_D)
m+11 2710
0000
(PORT_E)
m+13 0000
810A
(PORT_F)
m+15 000A
03A0
(PORT_G)
+17m 7D00
0328
(PORT_H)
m+19 7DA0
m+6
m+8
m+10
m+12
m+14
m+16
m+18
General I/O A
General I/O B
General I/O C
General I/O D
General I/O E
General I/O F
General I/O G
General I/O H
On PLC Direction On MC Unit
PORT_A CIO 0000 to 0009
←
OW 0B00 to 0B09
PORT_B CIO 5000 to 5099
→
IW 0BA0 to 0C03
PORT_C WR 200 to 204
→
IW 0C40 to 0C43