Omron CS1W-MCH71 -, Operation Manual

Page: 414 / 717

369
Command Details
Section 6-3
Note Setting range when viewed as BCD data.
Description • BIN command converts the specified value (BCD data) into binary (BIN
code).
• BIN command can be used only for integer data.
BIN to BCD (BCD)
The BCD command converts the BIN data into the BCD data.
Command type Not executed as an independent command (no type).
Format <Variable> = BCD<numerical value>;
Ex: #MW1000 = BCD #MW1001;
Operand
Note Setting range when viewed as BIN data.
Description • BCD command converts the specified value (BIN data) to BCD code.
• BCD command can be used only for integer data.
Block Transfer (XFER)
Data is transferred as a block.
Command type Multiple execution command
Format XFER<transfer source first data>_<transfer destination first data>_N<number
of transferred data>;
Ex: XFER #MW1000_#MW1100_N2;
Operand
1 2 3 4 0 4 D 2
1234 (BCD)
1234 (binary)
Operand Setting range Decimal Variable specification INC/ ABL
influ-
ence
Bit Word Long
word
Real
number
Indirect
specifi-
cation
First term Variable No No Yes Yes No No No
Second term Word type: 0-
9999 (See
note.)
Long type: 0-
99999999 No No Yes Yes No Yes No
0 D 2 1 2 3 4
1234 BCD
4
1234 (binary)
Operand Setting range Decimal Variable specification INC/ ABL
influ-
ence
Bit Word Long
word
Real
number
Indirect
specifi-
cation
Transfer source first
data Variable No No Yes No No No No