Screen Reference
ISDN Trunk Group
982
Administrator’s Guide for Avaya Communication Manager
November 2003
Path Replacement Method
Appears when either the
ISDN-PRI trunk
or the
ISDN-BRI trunk
fields and the
Basic Call Setup
and
Supplementary Services with Rerouting
fields are set to y on the System-Parameters
Customer-Options screen and when the
Supplementary Service Protocol
is either b or e and the
Group
Type
field is isdn on the ISDN trunk group screen.
Replace Restricted Numbers
Appears when the Group Type field is isdn. Indicates whether to replace restricted numbers with
administrable strings for incoming and outgoing calls assigned to the specified trunk group. This field
applies to BRI and PRI trunks.
Replace Unavailable Numbers
Appears when the Group Type field is isdn. Indicates whether to replace unavailable numbers with
administrable strings for incoming and outgoing calls assigned to the specified trunk group. This field
applies to BRI and PRI trunks.
SBS?
Appears when the
Local Country Code and International Access Code
fields are administered on the
Feature-Related System-Parameters screen and when the
Supplementary Service Protocol
is b and the
Group Type
field is isdn and
Carrier Medium
is IP and
Dial Access
is n on page 1 of the ISDN trunk
group screen.
Valid entries
Usage
better-route
Uses the most economical route, for example, the reconfigured call
does not use the same trunk group as the original call.
always
Always reconfigures the call regardless of the trunk group used.
Valid entries
Usage
y/n
Enter y for the display to be replaced regardless of the service type
of the trunk.
Valid entries
Usage
y/n
Enter y for the display to be replaced regardless of the service type
of the trunk.
Valid entries
Usage
y/n
Enter y to enable Separation of Bearer and Signaling (SBS) for the
trunk group. The default is n (SBS is not enabled).