Home
/
Avaya
/
Communication Manager
/
Administrator'S Manual

Avaya Communication Manager, Administrator'S Manual, Page: 930 / 1854

Share

Page: 930 / 1854

Avaya Communication Manager Administrator'S Manual Download Page 930

Screen Reference
IP Codec Set

930

Administrator’s Guide for Avaya Communication Manager

November 2003

Media Encryption

This field appears only if the Media Encryption over IP feature is enabled. It specifies one of three
possible options for the negotiation of encryption. The selected option for an IP codec set applies to all
codecs defined in that set..

NOTE:

The initial default value for this field is none when the

Media Encryption Over IP

field in

the Special Applications screen is enabled (y) for the first time. If this field is n, the

Media

Encryption

field on the IP Codec Set screen is hidden and functions as if none was

selected.

Packet Size (ms)

A display-only field showing the packet size in milliseconds.

Silence Suppression

Enables RTP-level silence suppression on the audio stream.

Valid
entries

Usage

aes

Advanced Encryption Standard (AES), a standard cryptographic
algorithm for use by U.S. government organizations to protect
sensitive (unclassified) information.

Use this option to encrypt these links:

•

Server-to-gateway (H.248)

•

Gateway-to-endpoint (H.323)

aea

Avaya Encryption Algorithm. Use this option as an alternative to AES
encryption when:

•

All endpoints within a network region using this codec set
must be encrypted.

•

All endpoints communicating between two network regions
and administered to use this codec set must be encrypted.

none

Media stream is unencrypted. This option prevents encryption when
using this codec set and is the default setting when Media Encryption
is not enabled.

Valid
entries

Usage

y/n

Enter y to enable RTP-level silence suppression on the audio stream.

«
...
928
929
930
931
932
...
»

Summary of Contents for Communication Manager































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments