Screen Reference
DS1 Circuit Pack
Administrator’s Guide for Avaya Communication Manager
787
November 2003
Line Compensation
The appropriate entry in this field varies with the type of cable used, so work with your network service
provider to determine the correct setting in your situation. The following table shows the appropriate
entries for different lengths of 22-gauge ABAM cable terminated on a DSX-1 cross-connect.
The following table shows the appropriate entries for different lengths of 22-gauge ABAM cable directly
connecting to DS1 interfaces.
Location
This display-only field shows the port address specified in the add command when the circuit pack was
first administered.
MMI Cabling Board
This field appears only if the
MMCH
field is y on the System-Parameters Customer-Options screen.
MMI Interface
This display-only field appears if the
MMCH
field is y on the System-Parameters Customer-Options
screen and there is a value in the
MMI Cabling Board
field.
Valid
entries
Usage
1
Length: 000–133 (ft), 000-40.5 (m)
2
Length: 133–266 (ft), 40.5–81.0 (m)
3
Length: 266–399 (ft), 81.0–122 (m)
4
Length: 399–533 (ft), 122–163 (m)
5
Length: 533–655 (ft), 163–200 (m)
Valid
entries
Usage
1
Length: 0000–0266(ft), 000–081(m)
2
Length: 0266–0532(ft), 081–162(m)
3
Length: 0532–0798(ft), 162–243(m)
4
Length: 0798–1066(ft), 243–325(m)
5
Length: 1066–1310(ft), 325–400(m)
Valid entries
Usage
slot address
(cabinet,
carrier, slot)
Enter the slot location (cabinet, carrier, slot) of the multimedia
interface circuit pack that is connected to the Expansion Services
Module (ESM).