Enhancing System Security
Setting up Security Violations Notification
342
Administrator’s Guide for Avaya Communication Manager
November 2003
See
Remote Access
on page 1645 for more information on allowing authorized callers to access the
system from remote locations.
See
Barrier codes
on page 1388 or
QSIG to DCS TSC Gateway
on page 1114 for information on barrier
codes.
Setting up Security Violations Notification
This section shows you how to use Security Violations Notification (
SVN
) to set security-related
parameters and to receive notification when established limits are exceeded. You can run reports related
to invalid access attempts. You also can disable a login ID or remote access authorization that is
associated with a security violation.
When a security violation has occurred, there are steps that you can take to be sure that this same attempt
is not successful in the future. See the BCS Products Security Handbook for more information.
Before you start
If you are using ASG, on the
System-Parameters Customer-Options
screen, verify the
Access Security
Gateway
field is y. If not, contact your Avaya representative.
Instructions
To set up security violations notification:
1
Type change system-parameters security
and press
ENTER
.
The
Security-Related System Parameters
screen appears.
2
In the
SVN Login Violation Notification Enabled
field, type y.
This sets Security Violations Notification login violation notification.
SECURITY-RELATED SYSTEM PARAMETERS
SECURITY VIOLATION NOTIFICATION PARAMETERS
SVN Login Violation Notification Enabled? y
Originating Extension: 3040_ Referral Destination: attd_
Login Threshold: 3_
Time Interval: 0:03
Announcement Extension: ________
SVN Remote Access Violation Notification Enabled? y
Originating Extension: 2719_ Referral Destination: 2720_
Barrier Code Threshold: 3
Time Interval: 0:03
Announcement Extension: ________
SVN Authorization Code Violation Notification Enabled? y
Originating Extension: 3030_ Referral Destination: 3031_
Authorization Code Threshold: 3
Time Interval: 0:03
Announcement Extension: ________