Screen Reference
Trunk Group
1302
Administrator’s Guide for Avaya Communication Manager
November 2003
Figure 374: Administrable Timers for Trunk Group
CAUTION:
Customers: Do not change fields on this page without assistance from Avaya or your
network service provider.
Answer Send (msec)
This field appears only if the
Trunk Type
field is dis and the trunk group
Direction
field is incoming or
two-way. Only TN2140 and TN2199 ports receive this timer.
Busy Tone Disconnect
The field appears when
Enable Busy Tone Disconnect for Analog loop-start Trunks
is y on the System
Parameters Country-Options screen.
Valid entries
Usage
10 to 2550 in
increments of 10
Enter the duration of the answer signal pulse.
Valid entries
Usage
y/n
Enter y to allow Communication Manager to recognize a busy tone
signal as a disconnect on this trunk group.
add trunk-group next
Page 3 of x
ADMINISTRABLE TIMERS
Send Incoming/Outgoing Disconnect Timers to TN465 Ports? _
Outgoing Dial Guard(msec): _____
Incoming Glare Guard(msec): _____
Outgoing Glare Guard(msec): _____
Outgoing Rotary Dial Interdigit (msec): ____
Ringing Monitor(msec): _____
Incoming Seizure(msec): ____
Outgoing End of Dial(sec): ___
Outgoing Seizure Response(sec): ___
Programmed Dial Pause(msec): _____
Disconnect Signal Error(sec): ___
Flash Length(msec): ____
Busy Tone Disconnect?
END TO END SIGNALING
Tone (msec): ____
Pause (msec): 150
OUTPULSING INFORMATION
PPS: 10
Make(msec): 40
Break(msec): 60 PPM? y
Frequency: 50/12k