Avaya Communication Manager Administrator'S Manual Download Page 58

Page: 58 / 1854

System Basics
Backup via the Web interface (S8100 Media Server only)

Administrator’s Guide for Avaya Communication Manager

November 2003

Click the pencil symbol next to the scheduled backup you want to change.

The Changing this backup schedule displays:

Make any changes as appropriate, and click Submit.

The Current list of scheduled backups displays. The changes are activated.

Checking Scheduled Backup Status

To review previous backups, click Last scheduled backup results.

The following screen displays:

Summary of Contents for Communication Manager































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Communication Manager

Reviews:

Avaya Communication Manager, Administrator'S Manual, Page: 58 / 1854

Search results

Summary of Contents for Communication Manager

Reviews: