Managing Displays
Displaying ICLID Information
158
Administrator’s Guide for Avaya Communication Manager
November 2003
Instructions
We will set up tie trunk group 10 to receive calling party information and display the calling party number
on the phone of the person called.
1
Type change trunk group 10.
The
Tone Generation
screen for trunk group 10 appears.
2
Type tone in the
Incoming Dial Type
field.
3
Press
NEXT PAGE
and type *ANI*DNIS in the
Incoming Tone (DTMF) ANI
field.
4
Press
ENTER
to save your changes.
Displaying ICLID Information
Communication Manager collects the calling party name and number (Incoming Call Line Identification,
or
ICLID
) received from the central office (
CO
) on analog trunks.
Before you start
Be sure the
Analog Trunk Incoming Call ID
field is set to
y
on the System-Parameters
Customer-Options screen.
See the Hardware Guide for Avaya Communication Manager for information on the required circuit
pack.
TRUNK GROUP
Group Number: 10_
Group Type: tie_____
CDR Reports: r
Group Name: Node1 to Node3
_______ COR: 10
TN: ___
TAC: *10__
Direction: two-way
Outgoing Display? n
Trunk Signaling Type: ____
Dial Access? n
Busy Threshold: 99_ Night Service: _____
Queue Length: ___ Incoming Destination: 2000_
Comm Type: voice
Auth Code? n
Trunk Flash? n
BCC: _
ITC? ____
TRUNK PARAMETERS
Trunk Type (in/out): auto/auto-incorrect Incoming Rotary Timeout(sec): 5
Outgoing Dial Type: _________ Incoming Dial Type: tone
Disconnect Timing(msec): 500
Digit Treatment: __________ Digits: ____
Sig Bit Inversion: none
Incoming Dial Tone? y
Disconnect Supervision - In? y
Out? n
Answer Supervision Timeout: 0__ Receive Answer Supervision? y