Home
/
Avaya
/
Communication Manager
/
Administrator'S Manual

Avaya Communication Manager, Administrator'S Manual, Page: 883 / 1854

Share

Page: 883 / 1854

Avaya Communication Manager Administrator'S Manual Download Page 883

Screen Reference

Hospitality

Administrator’s Guide for Avaya Communication Manager

883

November 2003

Housekeeper Information Configuration

This indicates whether housekeeper information is being exchanged between the server and the PMS.

Journal/Schedule Endpoint

This is a valid data extension number that is assigned to the data module connected to the
Journal/Schedule printer.

Message Waiting Configuration

This indicates whether message waiting notification requests and changes are being exchanged between
the server and the PMS.

Number of Housekeeper ID Digits

Valid entries

Usage

act-nopms

The message is acknowledged (MESSAGE ACK), but no action is
taken.

act-pms

If active (act-pms), the server and PMS exchange and accept
housekeeper information.

Valid entries

Usage

Valid data
extension number

Cannot be a VDN extension. This extension can be the same as
the PMS/Log printer and both sets of reports can be printed on
the same printer. This extension is dialed by the server to send
journal information or schedule reports to the printer.

PMS_LOG

Use this value if the printer is connected over a TCP/IP link, and
this link is defined as PMS_LOG on the IP Services screen.

PMS_JOURNAL

Use this value if the printer is connected over a TCP/IP link, and
this link is defined as PMS_JOURNAL on the IP Services
screen.

blank

Valid entries

Usage

act-nopms

The message is acknowledged (MESSAGE ACK), but no action is
taken.

act-pms

Message waiting is active on the server and information between
the PMS and server is being transmitted.

Valid entries

Usage

0 to 6

Enter the number of digits that the housekeeper must dial for
identification.

«
...
881
882
883
884
885
...
»

Summary of Contents for Communication Manager































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments