Screen Reference
Terminal Parameters
1240
Administrator’s Guide for Avaya Communication Manager
November 2003
Primary levels
The following fields only appear if Customize Parameters is set to y. In each case, if the field is blank, the
system uses the default setting from the Default Parameter Set. Also, these fields all require the same
input; valid entries are from -44.0 db through +14.0 db in 0.5 increments (for example, -44.0, -43.5, -43.0
and son on).
Volume for DCP Types
This field allows the DCP phone volume to be adjusted while the call is in progress.
Volume for IP Types
This field allows the IP phone volume to be adjusted while the call is in progress.
NOTE:
If you use this field, Avaya recommends that you not change any values in the PRIMARY
LEVELS or BUILT-IN SPEAKER LEVELS areas.
Valid entries
Usage
default speaker, handset
unchangeable
The speaker resets to the default settings while the
adjusted handset setting is retained.
default settings used to begin each
call
No adjusted handset and speaker settings are
retained.
retain handset and speaker
between calls
The adjusted handset and speaker settings are
retained.
retain speaker, handset
unchangeable
Only the adjusted speaker setting is retained.
Valid entries
Usage
default speaker, handset
unchangeable
The speaker resets to the default settings while the
adjusted handset setting is retained.
default settings used to begin each
call
No adjusted handset and speaker settings are
retained.
retain handset and speaker
between calls
The adjusted handset and speaker settings are
retained.
retain speaker, handset
unchangeable
Only the adjusted speaker setting is retained.