Screen Reference
Dial Plan Parameters
774
Administrator’s Guide for Avaya Communication Manager
November 2003
AAR/ARS Internal Call Prefix
The digits entered in this field are concatenated with the calling or called extension. Appears only if, on
the System-Parameters Customer-Options screen, the
ARS/AAR Dialing Without FAC
field is y.
(Contact your Avaya representative to discuss the ARS/AAR Dialing Without FAC feature before
enabling it.)
AAR/ARS Internal Call Total Length
The total length of the internal call digit string. Appears only if, on the System-Parameters
Customer-Options screen, the
ARS/AAR Dialing Without FAC
field is y. (Contact your Avaya
representative to discuss the ARS/AAR Dialing Without FAC feature before enabling it.)
NOTE:
If either the
AAR/ARS Internal Call Prefix
or the
AAR/ARS Internal Call Total Length
field is non-blank and valid, the other must also be non-blank and valid. In addition, the
longest extension length on the Dial Plan Analysis screen, plus the length of the
ARS/AAR Internal Call Prefix
, must equal or be greater than, the
ARS/AAR Internal Call
Total Length
value.
ETA Node Number
Enter the number of the destination server for Extended Trunk Access (ETA) calls. ETA calls are
unrecognized numbers you can send to another switch for analysis and routing. Such numbers can be
Facility Access Codes, Trunk Access Codes, or extensions that are not in the UDP table.
ETA Routing Pattern
Enter the number of the routing pattern to reach the destination server.
Valid entries
Usage
0–9 up to 8
digits, or blank
Enter a string from 1 to 8 digits long (not including * or #).
Valid entries
Usage
6-10 or blank
Enter the total length of the internal call digit string, which
includes the Internal Call Prefix and the calling or called
extension.
Valid entries
Usage
1 – 999 or blank
Enter the number of a destination server.
Valid entries
Usage
1 – 640 or blank
Avaya DEFINITY Server R, CSI, or SI.
1–999 or blank
Avaya S8300 Media Server, S8700 IP-Connect, S8700
Multi-Connect.