Planning the System
Other Useful Settings
Administrator’s Guide for Avaya Communication Manager
77
November 2003
6
In the
Retry Interval (sec)
field, type 30.
This is length of time between retries.
7
In the
Main Number
field, type the number that is to be displayed at the end of the pager message.
We’ll type 303-555-0800.
8
In the
Pager Number
field, type the number for the pager.
We’ll type 303-555-9001.
9
In the
Pin Number
field, type pp77614567890.
This is the PIN number, if required, for the pager. Insert any pause digits (pp) as needed to wait
for announcements from the pager service to complete before sending the PIN.
10
In the
DTMF Duration - Tone (msec)
field, type 100.
This is the length of time the DTMF tone is heard for each digit.
11
In the
Pause (msec)
field, type 100.
This is the length of time between DTMF tones for each digit.
12
Press
ENTER
to save your changes.
Related topics
Refer to
Crisis Alert
on page 1505 for more detailed information.
Other Useful Settings
There are many settings that control how your system operates and how your users phones work. Most of
these you administer through one of the System Parameters screens. This section describes a few of the
items you can enable in your system to help your users work more efficiently. See
Feature-Related
System Parameters
on page 816 for a more detailed description of the available system settings.
Automatic callback if an extension is busy
You can allow users to request that the system call them back if they call a user whose telephone is busy.
See
Automatic callback
on page 1374.
Automatic hold
You can set a system-wide parameter that allows your users to initiate a call on a second line without
putting the first call on Hold. This is called Automatic Hold, and you enable it on the
Feature-Related
System Parameters
screen. If you do not turn this on, the active call drops when a the user presses the
second line button.