Managing Group Communications
Setting up Chime Paging Over Loudspeakers
404
Administrator’s Guide for Avaya Communication Manager
November 2003
Instructions
To set up chime paging, you fill out the necessary fields on the Loudspeaker Paging screen and then
assign chime codes to individual extensions on the Code Calling IDs screen.
As an example, we will set up chime paging for a clothing store with 3 zones. We’ll allow users to page
all zones at once, and we will assign a class of restriction of 1 to all zones.
1
Type change paging loudspeaker
and press
ENTER
.
The
Loudspeaker Paging
screen appears.
2
In the
Code Calling Playing Cycles
field, type 2.
This field sets the number of times a chime code plays when someone places a page.
3
In the
Port
field for
Zone 1
, type 01A0301.
Use this field to assign a port on an auxiliary trunk circuit pack to this zone.
4
In the
Code Calling — TAC
field type 80.
Use this field to assign the trunk access code users dial to page this zone. You cannot assign the
same trunk access code to more than one zone.
5
In the
Code Calling — COR
field type 1.
Use this field to assign a class of restriction to this zone. You can assign different classes of
restriction to different zones.
6
On the
Zone 1
row, type Men’s Department in the
Location
field.
Give each zone a descriptive name so you can easily remember the corresponding physical
location.
7
Repeat steps 4 through 6 for zones 2 and 3.
8
In the
ALL
row, type 89 in the
Code Calling — TAC
field and 1 in the
Code Calling — COR
field.
By completing this row, you allow users to page all zones at once. You do not have to assign a
port to this row.
9
Press
ENTER
to save your changes.
LOUDSPEAKER PAGING
CDR? y
Voice Paging Timeout (sec):
Code Calling Playing Cycles: 2
PAGING PORT ASSIGNMENTS
Voice Paging Code Calling
Zone Port TAC COR TN TAC COR TN Location:
1:
01A0301
1
80
1
1
Men’s Department
2:
01A0302
1
81
1
1
Women’s Department
3:
01A0303
1
82
1
1
Children’s
4: 1 1
5: 1 1
6: 1 1
7: 1 1
8: 1 1
9: 1 1
ALL:
1
89
1
1