Screen Reference
CDR System Parameters
670
Administrator’s Guide for Avaya Communication Manager
November 2003
Condition Code ‘T’ for Redirected Calls
You can elect to identify CDR records of calls that have been redirected automatically off the server
running Avaya Communication Manager.
Digits to Record for Outgoing Calls
Disconnect Information in Place of FRL
See
Call detail record field descriptions
on page 1460 for more information.
EIA Device Bit Rate
Applies to DEFINITY SI only. Displays if either
Primary
or
Secondary Output Format
field is eia.
Valid entries
Usage
y
The Condition Code of both CDR records for the call will be ‘T.’
n
The Condition Codes normally associated with the
Record
Outgoing Calls Only
field are generated.
Valid entries
Usage
dialed Use
dialed to record the digits a user actually dials.
outpulsed
Use outpulsed to record the digits that Communication Manager
actually sends out over the trunk, including any additions or
deletions that take place during routing.
Valid entries
Usage
y
Enter y to replace the
Facility Restriction Level (FRL)
field with
information about why a call disconnects. You can use this
information to isolate problems between the DEFINITY R and the
telephone network.
n
Enter n to record the call’s FRL.
Valid entries
300
1200
2400
4800
9600
Enter the baud rate of the CDR device connected to the EIA port.