Managing Data Calls
PC Interface
456
Administrator’s Guide for Avaya Communication Manager
November 2003
3
Go to page 4 and make sure that the
Processor Ethernet
field is y.
4
Type display ip-interfaces and press
ENTER
.
Make sure the PROCR is administered and its Ethernet port is enabled. If the PROCR is not listed
(PROCR should appear in the
Service Type
field and the previously administered node name
should appear in the
Node Name
field), add a PROCR.
Administering CTI Links - Summary
Use this information to familiarize yourself with the basic administrative tasks for administering CTI
links using the Co-Resident DLG.
•
Use the
display system-parameters customer-options
command make sure the following
fields are set to y.
—
ASAI Link Core Capabilities
and/or
Computer Telephony Adjunct Links
— Co-Res DEFINITY LAN Gateway
•
Use the
add cti-link
command to administer a CTI link.
•
Use the
change ip-services
command and in the
Service Type
field, enter DLG.
When the
Service Type
field is DLG, the system adds a DLG Administration page as the last
page of the screen.
— Complete the DLG Administration page to add your client information.
NOTE:
For additional information on DLG administration for the S8300 Media Server, see
“Avaya CallVisor® ASAI Technical Reference.”
PC Interface
The personal computer (PC) Interface consists of the PC/PBX platforms and PC/ISDN Platform product
family. These products are used with Avaya Communication Manager to provide users of
IBM-compatible PCs fully-integrated voice and data workstation capabilities.
Two groups of different configurations are available for PC Interface: group 1 uses DCP and group 2 uses
the ISDN-BRI (Basic Rate Interface) protocol.
The group 1 configurations consist of DCP configurations that use a DCP expansion card) in the PC to
link to the server or media server. Group 1 (shown in
Figure 46, DCP PC interface configuration (Group
1),
on page 439) uses the following connections:
•
The PC Interface card plugs into an expansion slot on the PC. The card has 2 standard 8-pin
modular jacks (line and phone).
•
The digital phone plugs into the phone jack on the PC Interface card.
•
The line jack on the card provides a digital port connection to Avaya DEFINITY servers.
•
The distance between the PC Interface card and the PBX should be no more than 1524m for
24-gauge wire or 1219m for 26-gauge wire.