Screen Reference
Trunk Group
1308
Administrator’s Guide for Avaya Communication Manager
November 2003
Outgoing Rotary Dial Interdigit (msec)
This field only appears when:
1
the trunk group
Group Type
field is access, aplt, co, diod, dmi-bos, fx, rlt, tandem, or wats and
the
Outgoing Dial Type
field is rotary
2
the
Group Type
field is tie, the
Trunk Type
field is blank, cont, or dis, and the
Outgoing Dial
Type
field is rotary
3
the
Group Type
field is tie, and the
Trunk Type
field is tge, tgi, or tru (the
Outgoing Dial Type
field does not appear but is implied to be rotary).
Outgoing Seizure (msec)
Appears when the Country field is 15, the Direction field is outgoing or two-way, and the
Trunk Type
field is 2-wire-ac, 2-wire-dc, or 3-wire. This timer is sent only to the TN2199 circuit pack.
Outgoing Seizure Response (sec)
This timer is sent to the TN438B, TN439, TN447, TN458, TN464B (or later), TN465B (or later), TN767,
TN2140, TN2147, TN2184, TN2199, and TN2242 circuit packs.
Valid entries
Usage
150 to 2550 in
increments of
10
Enter the minimum time between outpulsed digits on outgoing
rotary trunks.
Valid entries
Usage
20 to 2550 in
increments of
10
Enter the duration of the outgoing seizure signal.
Valid entries
Usage
1 to 255 in
increments of 1
Enter the maximum interval that Communication Manager should
wait after sending a seizure signal to receive seizure
acknowledgment from the far-end. If the acknowledgment is not
received in this time, a seizure failure response is uplinked. For
Brazil pulsed E&M signaling, use 255.