Screen Reference
Location Parameters
1048
Administrator’s Guide for Avaya Communication Manager
November 2003
Outgoing Shuttle Exchange Cycle Timer (sec)
Appears when the
Incoming Call Type
field is group-ii-mfc or non-group-ii-mfc and the
Outgoing Call
Type
field is group-ii-mfc or none on the Multifrequency-Signaling-Related System Parameters
screen. This field applies only to multifrequency signaling calls made from Avaya Communication
Manager.
Upper Bound (msec)
Specifies the upper bound of the flashhook interval. Specifies the upper bound of the station-to-switch
recall signal timing interval in milliseconds. Appears when the
Flashhook Interval
field is y.
Field descriptions for page 2
Figure 299: Loss Plans
Valid entries
Usage
1 to 25
Enter the number of seconds to time an exchange cycle (starts
when the far end requests a digit until Avaya Communication
Manager sends the requested digit).
Valid entries
Usage
80 to 1250 (in
increments of
10).
A flash of 50 msec to 130 msec is always acceptable from a
2500-type set regardless of the setting of the Upper and Lower
bounds and will be treated as the digit one.
change location-parameters
LOSS PLANS
2 PARTY LOSS PLAN: 1
Customize? n
TONE LOSS PLAN: 1
Customize? n
End-to-End total loss (dB) in a n-party conference:
Customize? n
3:_15
4:_21
5:_26
6:_29