Managing Trunks
Adding a CO, FX, or WATS Trunk Group
352
Administrator’s Guide for Avaya Communication Manager
November 2003
Instructions
As an example, we will set up a two-way CO trunk group that carries voice and voice-grade data only.
Incoming calls terminate to an attendant during business hours and to a night service destination the rest
of the time
To add the new CO trunk-group:
1
Type add trunk-group next and press
ENTER
.
The Trunk Group screen appears. The system assigns the next available trunk group number to
this group. In our example, we’re adding trunk group 5.
2
In the
Group Type
field, type co.
This field specifies the kind of trunk group you’re creating.
3
In the
Group Name
field, type Outside calls.
This name will be displayed, along with the group number, for outgoing calls if you set the
Outgoing Display?
field to y. You can type any name up to 27 characters long in this field.
4
Type 85 in the
COR
field.
This field controls which users can make and receive calls over this trunk group. Assign a class of
restriction that’s appropriate for the COR calling permissions administered on your system.
5
In the
TAC
field, type 105.
This field defines a unique code that you or your users can dial to access this trunk group. The
code also identifies this trunk group in call detail reports.
6
In the
Direction
field, type two-way.
This field defines the direction of traffic flow on this trunk group.
7
Type 1234
in the
Night Service
field.
This field assigns an extension to which calls are routed outside of business hours.
TRUNK GROUP
Group Number: 5
Group Type: co
CDR Reports: y
Group Name: Outside calls
COR: 85
TN: 1__
TAC: 105
Direction: two-way
Outgoing Display? n
Dial Access? n
Busy Threshold: 99
Night Service: 1234
Queue Length: 0
Country:
Incoming Destination: attd
Comm Type: voice
Auth Code? n Digit Absorption List: _
Prefix-1? y Trunk Flash? n
Toll Restricted? y
TRUNK PARAMETERS
Trunk Type: ground start
Outgoing Dial Type: tone
Cut-Through? n
Trunk Termination: rc
Disconnect Timing(msec): 500_
Auto Guard? n Call Still Held? n Sig Bit Inversion: none
Trunk Gain: high
Disconnect Supervision -In? y Out? n
Answer Supervision Timeout: 10
Receive Answer Supervision? n