Screen Reference
DS1 Circuit Pack
788
Administrator’s Guide for Avaya Communication Manager
November 2003
Name
Use this field to assign a significant, descriptive name to the DS1 link. Avaya recommends putting the
vendor’s circuit ID for the link in this field, because that information helps you troubleshoot problems
with the link, but you could also use this field to indicate the function or the destination of this DS1
facility. In that case, put the DS1 link circuit ID in the
Name
field of the trunk group associated with this
link.
Peer Protocol
This allows you to administer the peer level protocol that will operate in a private network. This field
appears if the
Interface
field is peer-master or peer-slave. To enter Q-SIG, the
Basic Call Setup
field
on the System-Parameters Customer-Options screen must be y.
Protocol Version
In countries whose public networks allow multiple layer-3 signaling protocols for ISDN-PRI service, this
field selects the protocol that matches your network service provider’s protocol. See
Public network
signaling administration for ISDN-PRI Layer 3
on page 789 to see which countries support which
protocols.
This field appears only when:
•
The
Signaling Mode
field is isdn-pri and the
Connect
field is network.
•
The
Signaling Mode
field is isdn-pri, the
Connect
field is pbx, and the
Interface
field is user or
network.
!
WARNING:
The AT&T Switched Network Protocol does not support restricted displays of connected numbers.
Therefore, if you administer the 1a country-protocol/protocol-version combination on the DS1
screen, you cannot set the
Send Connected Number
field to
r
(restricted) on the ISDN-PRI Trunk
Group screen, as this causes display problems.
Valid entries
Usage
1–15 characters
Enter a name for the DS1 link.
Valid entries
Usage
Q-SIG
This implements QSIG Network Basic Call.
TTC
For private networking. Requires a Digital Trunk (Japan 2 MB
TTC) (TN2242) circuit pack.
Valid entries
Usage
a, b, c, d
The entry in this field must match the protocol used by your
network service provider, so work with your vendor to determine
the appropriate entry.