Feature Reference
Multifrequency signaling
Administrator’s Guide for Avaya Communication Manager
1615
November 2003
•
Personal Station Access (PSA)
For ANI, the PSA extension number and COR overrides the extension number and COR of the
physical terminal where the PSA extension number is associated. ANI prefix and ANI truncation
will apply to associated PSA extension numbers.
•
Remote Access
The COR of a remote access barrier code is not used for ANI prefix determination when the
originating end point dials a remote access extension and then places a call. If the originating
endpoint is an extension, the extension’s ANI is used. If the originating endpoint is an incoming
trunk, the ANI for PBX is used.
•
Station Set Displays
When no ANI is possible, if station sets are equipped with display option, they do not display the
ANI digits. Instead, the trunk group name displays. When ANI is possible, ANI displays on the
station set.
For India Only
. If ANI digits are padded with “zero,” then zeroes also are displayed along with
ANI digits.
•
Tandem / Offnet Calls
If ANI digits are received on incoming MFC calls, the ANI digits are sent to outgoing
tandem/off-net calls.
For Russia Only
. The ANI is requested on incoming trunks only when all the address digits
have been collected. When the incoming trunk on a tandem call is a Russian incoming local trunk
administered to collect ANI, the PBX collects all ANI digits before seizing the outgoing tandem
trunk. This happens even if ARS is administered with a “min” value low enough that it would be
possible to determine an outgoing route through digit analysis.
For India Only
. On an outgoing tandem-call, the default operation is to send the
ANI-Not-Available forward signal if ANI is not available from the incoming trunk. However, in
order to support this operation, leave the ANI for PBX field blank, and define the
ANI-Not-Available signal.
Related topics
For administration settings, see
Multifrequency-Signaling-Related Parameters
on page 1076.
To establish MF Signaling for a trunk group, see
Trunk Group
on page 1256, (CO, DID, DIOC, TIE) -
Incoming and Outgoing Dial Type.
To set up MFC ANI, see
AAR and ARS Digit Analysis Table
on page 603,
AAR and ARS Digit
Conversion Table
on page 607, and
Class of Restriction
on page 682.