Screen Reference
DS1 Circuit Pack
780
Administrator’s Guide for Avaya Communication Manager
November 2003
Figure 168: DS1 Circuit Pack screen for Channel Associated Signaling
Bit Rate
Use this field to select the maximum transmission rate for DS1 circuit packs that support either T-1 or
E-1 service. For circuit packs that only support one of these services, the field is a display-only field.
NOTE:
Once an add ds1 operation is complete (that is, the DS1 screen has been submitted) you
can’t change the
Bit Rate
field with a change ds1 command. Instead, execute a remove
ds1 command. Then use the add ds1 command to administer the circuit pack again.
You’ll have to re-enter all the information for the circuit pack.
TN464C (and later release) circuit packs have an option switch that must be set to match
the entry in the
Bit Rate
field.
Valid entries
Usage
1.544
Use for T-1 service.
2.048
Use for E-1 service.
add ds1 xxxxxx
Page 1 of 2
DS1 CIRCUIT PACK
Location: 01A13
Name: _______________
Bit Rate: 2.048
Line Coding: cmi
Signaling Mode: CAS
Interconnect: pbx
Country Protocol: 3
Interface Companding: mulaw
Idle Code: 11111111
MAINTENANCE PARAMETERS
Slip Detection? n