Managing Phones
Setting up Remote Office
106
Administrator’s Guide for Avaya Communication Manager
November 2003
Setting up a trunk group
You can modify an existing trunk group or add a new one. In our example, we’ll add trunk group 6.
Before you start
Perform
Setting up a signaling group
on page 106.
To set up the trunk group for your remote office:
1
Type add trunk group 6.
The Trunk Group screen appears.
2
In the
Group Type
field, type ISDN.
ISDN-PRI
or
ISDN-BRI
must be y on the System Parameters Customer Options screen.
3
In the
TAC
field, type in the trunk access code that conforms to your dial plan.
4
In the
Carrier Medium
field, type
IP
(Medpro).
5
In the
Dial Access
field, type y.
6
In the
Service Type
field, type tie.
7
In the
Signaling Group
field, type in the signaling group you created.
8
Press
ENTER
to save your changes.
Setting up a signaling group
Each Remote Office has own listen port and signaling group. Set up a new trunk group, or use an existing
trunk group administered for H.323 signaling.
add trunk-group next
Page 1 of x
TRUNK GROUP
Group Number: 6___
Group Type: ________
CDR Reports: _
Group Name: ___________________________ COR: __
TN: ___
TAC: __6__
Direction: ________
Outgoing Display? _
Trunk Signaling Type: ____
Dial Access? _
Busy Threshold: ___ Night Service: ________
Queue Length: ___ Incoming Destination: ________
Service Type: _____
Auth Code? _
Trunk Flash? _
BCC: _
ITC? ____
TRUNK PARAMETERS
Trunk Type (in/out): ____________ Incoming Rotary Timeout(sec): __
Outgoing Dial Type: _________ Incoming Dial Type: ________
Disconnect Timing(msec): ____
Digit Treatment: __________ Digits: ____
Sig Bit Inversion: none
Analog Loss Group: ___
Digital Loss Group: ___
Incoming Dial Tone? _
Incoming Calling Number - Delete: ___ Insert: _______ Format: _______
Bit Rate: _____
Synchronization: _____
Duplex: ____
Disconnect Supervision - In? _
Out? _
Answer Supervision Timeout: ___ Receive Answer Supervision? _