Managing Data Calls
Data Call Setup
420
Administrator’s Guide for Avaya Communication Manager
November 2003
DCP data modules
Data-terminal dialing
DCP data-terminal dialing allows a user to set up and disconnect data calls directly from a data terminal
as follows.
1
At the DIAL: prompt, the user types the data number. The message RINGING displays.
2
If the call is queued, the message WAIT, XX IN QUEUE displays. The queue position XX
updates as the call moves up in queue.
3
To originate and disconnect a call, the user presses BREAK. If the terminal does not generate a
2-second continuous break signal, the user can press originate/disconnect on the data module.
4
The user can enter digits at the DIAL: prompt.
CHECK OPTIONS
DCP, BRI
Data-module options are incompatible.
XX IN QUEUE
DCP, BRI
Current position in queue.
PROCESSING
DCP, BRI
Out of queue. Facility is available.
TIMEOUT
DCP, BRI
Time is exceeded. Call terminates.
FORWARDED
DCP, BRI
Equivalent to redirection-notification signal.
Called terminal activates Call Forwarding
and receives a call, and call is forwarded.
INCOMING CALL
DCP, BRI
Equivalent to ringing.
INVALID
ADDRESS
DCP
Entered name is not in alphanumeric-dialing
table.
WRONG ADDRESS
BRI
Entered name is not in alphanumeric-dialing
table.
PLEASE ANS-
DCP, BRI
Originating telephone user transferred call to
data module using One-Button Transfer to
Data.
TRANSFER
DCP
Data Call Return-to-Voice is occurring.
CONFIRMED
DCP, BRI
Equivalent to confirmation tone. Feature
request is accepted, or call has gone to a local
coverage point.
OTHER END
DCP, BRI
Endpoint has terminated call.
DISCONNECTED
DCP, BRI
Call is disconnected.
WAIT
DCP, BRI
Normal processing continues.
WAIT, XX IN
QUEUE
DCP
Call is in a local hunt-group queue.
Table 8: Call-progress messages 2 of 2
Message
Application
Meaning
2 of 2