Command Reference
Before you start
Administrator’s Guide for Avaya Communication Manager
513
November 2003
18
Command Reference
Before you start
Avaya Communication Manager software utilizes the following command syntax:
action object qualifier
Use the commands in the tables below to access each administration screen.
Brackets [ ] indicate the qualifier is optional. Single quotes (‘ ’) indicate the text inside the quote must be
entered exactly as shown or an abbreviated form of the word may be entered. MAX is the maximum
number available in your system configuration.
Some qualifiers aren’t available on all systems. For example, on an Avaya S8300 Media Server with
Avaya G700 Media Gateway, the print qualifier is supported on Linux and Windows platforms only
when the command has been entered on a 4410-emulation terminal type. Entering the print qualifier
using emulation of any other terminal type will result an error message: “pr not supported by platform.”
The
display capacity
command is listed in your model’s Maintenance manual.
Command Reference
AAR and ARS Digit Analysis Table
Action
Object
Qualifier
change
aar analysis
Enter digits between 0 to 9, ‘*’, ‘x’, or ‘X’
[‘min’(1-MAX)]
change
ars analysis
Enter digits between 0 to 9, ‘*’, ‘x’, or ‘X’
[‘location’ (1-MAX or ‘all’)] [‘min’(1-MAX)]
display
aar analysis
Enter digits between 0 to 9, ‘*’, ‘x’, or ‘X’, [‘min’
(1-MAX)] [‘print’ or ‘schedule’]
display
ars analysis
Enter digits between 0 to 9, ‘*’, ‘x’, or ‘X’
[‘location’ (1-MAX or ‘all’)] [‘min’(1-MAX)]
[‘print’ or ‘schedule’]
list
aar analysis
Enter [‘start’ string] [‘count’ 1-MAX]
[‘route’(1-MAX or r1-r32)], [‘node’ (1-MAX)],
[‘to-node’ (1-MAX), [‘print’ or ‘schedule’]