16-34
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
7) Connect the handle cable 14P connector and the handle
cable 6P connector, and install the connectors on the main
relay bracket.
5) Apply marine grease to the shift pivot installation hole in
each of the throttle arm and the shift link B.
6) Set the 6 mm washer on the shift pivot on each remote
control cable.
Set the shift side and throttle side remote control cables on
the throttle arm and the shift link B respectively, and install
the 6 mm washers and the 6 mm lock pins.
8) Install the separate case, and tighten the two 6 x 28 mm
flange bolts, two 6 mm washers and the two 6 x 40 mm hex
bolts securely.
9) Perform the following adjustment.
- Throttle cable (P. 3-17)
- Shift cable (P. 3-20)
10) Install the engine cover (P. 4-2).
[1]
HANDLE CABLE
14P CONNECTOR
[2] HANDLE CABLE
6P CONNECTOR
[3]
MAIN RELAY
BRACKET
6 x 28 (2)
[1]
SEPARATE
CASE
[3]
6 x 40 mm
HEX BOLT (2)
[2]
6 mm
WASHER (2)
[6]
REMOTE CONTROL
CABLE [THROTTLE
SIDE]
[8]
REMOTE
CONTROL CABLE
[SHIFT SIDE]
[3]
6 mm
WASHER (4)
[4]
6 mm LOCK
PIN (2)
[2]
THROTTLE
ARM
[5]
SHIFT
LINK B
[1]
SHIFT
PIVOT (2)
[7]
(MARINE
GREASE)
626
