11-58
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
6) Install the oil case on the primary gear case and tighten the
eleven 6 x 25 mm flange bolts to the specified torque.
TORQUE: 10 N.m (1.0 kgf.m, 7 lbf.ft)
7) Tighten a new 12 mm drain plug washer and oil drain plug
bolt to the specified torque.
TORQUE: 23 N.m (2.3 kgf.m, 17 lbf.ft)
8) Install the oil level gauge.
[1]
OIL LEVEL
GAUGE
[3]
OIL CASE
6 x 25 (11)
[2]
12 mm DRAIN
PLUG WASHER
[4]
OIL DRAIN
PLUG BOLT
4) Apply engine oil to the outer surface of a new 13.8 x 2.5
mm O-ring and install it on the oil strainer.
5) Set the oil case gasket on the primary gear case.
Install the oil strainer on the primary gear case and tighten
the two 6 x 16 mm flange bolts to the specified torque.
TORQUE: 13 N.m (1.3 kgf.m, 10 lbf.ft)
[4]
OIL STRAINER
6 x 16 (2)
[1]
PRIMARY
GEAR CASE
[2]
OIL CASE
GASKET
[3] 13.8 x 2.5 mm
O-RING
336
