13-33
[GAS ASSISTED TYPE]
Check that the piston rod of the gas assisted damper assembly
is extended fully.
[1]
PISTON ROD
[2]
GAS ASSISTED
DAMPER ASSEMBLY
1) Apply marine grease to the outer surface of the two swivel
case bushings, and install them on the swivel case
assembly.
2) Install a new 7/8-14 UNF self-locking nut on the R. stern
bracket side of the tilting shaft.
Tighten the 7/8-14 UNF self-locking nut fully to the end of
the threads of the tilting shaft.
3) Apply rust-preventive agent to the threads on the R. stern
bracket side of the tilting shaft, and install the tilting bolt
cap.
4) Install the R. stern bracket and the 22 mm wave washer on
the tilting shaft.
5) Install the swivel case assembly on the tilting shaft.
[7]
R. STERN
BRACKET
[6]
TILTING SHAFT
[1]
SWIVEL CASE BUSHING (2)
[2]
SWIVEL CASE
ASSEMBLY
[8]
22 mm WAVE
WASHER
[5]
7/8-14 UNF SELF-
LOCKING NUT
[4]
TILTING BOLT CAP
[9]
(MARINE
GREASE)
[3]
(Apply rust-
preventive
agent.)
412
