14-15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
25) Remove the internal circlip, and remove the manual valve
and the seal washer.
Remove the O-ring and the D-ring from the manual valve.
Replace the O-ring and the D-ring with new ones on
reassembly.
27) Holding the valve side of the spool valve cap as if it is
wrapped in your hand as shown, blow the compressed air
through the small hole in the spool valve cap and remove
the valve comp. B from the spool valve cap.
Remove the O-rings from the spool valve cap and valve
comp. B.
Replace the O-rings with new ones on reassembly.
26) Remove the spool valve cap using a commercially available
driver socket [width: 2.8 mm (0.11 in)].
[2] O-RING
[1] D-RING
[5] SEAL WASHER
[4] INTERNAL
CIRCLIP
[3]
MANUAL
VALVE
[2]
DRIVER SOCKET
[WIDTH: 2.8 mm (0.11 in)]
(Commercially available)
[1] SPOOL VALVE
CAP
[4]
VALVE COMP. B
(UPPER CHAMBER
SIDE)
[3] SPOOL VALVE
CAP
[1]
SMALL
HOLE
[2]
O-RINGS
448
