20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
16-28
[2]
HARNESS
BAND CLIP
[1]
40 mm CORD
TUBE
[3]
CONNECTOR
32) Connect the four meter harness connectors [Equipped type
only] (P. 16-38).
Set the connectors in the 40 mm cord tube and clamp the
tube using a new harness band clip as shown.
• See P. 16-27 and 16-38 for the wire colors.
After fastening the harness band clip, cut off the excess of
the band at 15 to 20 mm (0.6 to 0.8 in) from the fastener
end.
31) Connect the connectors to the indicator light connector (P.
16-27).
Connect the connectors to the combination switch
connector (P. 16-27).
Connect the two waning buzzer connectors (P. 16-27).
Set the tube A over the connectors that are just connected
and clamp the tube A at the connectors securely using a
new harness band clip.
Set the tube A over the connectors that are just connected,
and clamp the meter harness A and tube A at the
connectors securely using a new harness band clip
[Equipped type only] (P. 16-38).
After clamping with the harness band clip, cut off the
excess of the band at 15 to 20 mm (0.6 to 0.8 in) from the
fastener end.
• Do not set the black connector of the combination switch
connector in the tube A.
[5]
TUBE A
[3]
CONNECTOR
[2]
BLACK CONNECTOR
[7]
COMBINATION
SWITCH
[4]
HARNESS
BAND CLIP
15 - 20 mm
(0.6 - 0.8 in)
[1]
EXCESS
[6]
WARNING BUZZER
CONNECTORS
614
