Samsung S5PC100, User Manual

Page: 1426 / 1863

S5PC100 USER’S MANUAL (REV1.0) VIDEO PROCESSOR
9.8-17
VP_SRC_V_POSITION [9:0]
Vertical offset in the source image.
This value should be in the range between 0 and
VP_SRC_HEIGHT.
If LINE_SKIP is 1, VP_SRC_V_POSITION should
be a half of that if LINE_SKIP is 0.
0
4.3.14
4.3.15 Video Processor Width of Source Image Control Register (VP_SRC_WIDTH, R/W, Address =
0xF010_ 004C)
VP_SRC_WIDTH Bit Description Reset Value
Reserved [31:11] Reserved, read as zero, do not modify 0
VP_SRC_WIDTH [10:0]
Width of the source image
(MIN : 32)
0
4.3.16 Video Processor Height of Source Image Control Register (VP_SRC_HEIGHT, R/W, Address =
0xF010_ 0050)
VP_SRC_HEIGHT Bit Description Reset Value
Reserved [31:10] Reserved, read as zero, do not modify 0
VP_SRC_HEIGHT [9:0]
Height of the source image
If LINE_SKIP is 1, VP_SRC_HEIGHT should be a
half of that if LINE_SKIP is 0.
(MIN : 4)
0
4.3.17 Video Processor Horizontal Offset of Destination Image Control Register (VP_DST_H_POSITION,
R/W, Address = 0xF010_ 0054)
VP_DST_H_POSITION Bit Description Reset Value
Reserved [31:11] Reserved, read as zero, do not modify 0
VP_DST_H_POSITION [10:0] Horizontal offset in the display 0
4.3.18 Video Processor Vertical Offset of Destination Image Control Register (VP_DST_V_POSITION,
R/W, Address = 0xF010_ 0058)
VP_DST_V_POSITION Bit Description Reset Value
Reserved [31:10] Reserved, read as zero, do not modify 0
VP_DST_V_POSITION [9:0] Vertical offset in the display 0
4.3.19 Video Processor Width of Destination Image Control Register (VP_DST_WIDTH, R/W, Address =
0xF010_ 005C)
VP_DST_WIDTH Bit Description Reset Value
Reserved [31:11] Reserved, read as zero, do not modify 0
VP_DST_WIDTH [10:0] Width of the display 0