S5PC100 USER’S MANUAL (REV1.0)
CCAN
8.5-19
6.2.4
Bit timing Register
•
CAN0_BT, R/W, Address = 0xEC70_000C
•
CAN1_BT, R/W, Address = 0xEC80_000C
CANn_BT
Bit
Description
R/W
Reset Value
Reserved [15]
Reserved
R
0
TSeg2
[14:12] The time segment after the sample point
0x0-0x7: valid values for TSeg2 are [0..7]. The actual
interpretation by the hardware of this value is such that one
more than the value programmed here is used.
R/W 0x2
TSeg1
[11:8]
The timing segment before the sample point
0x01-0x0F: valid values for TSeg1 are [1..15]. The actual
interpretation by the hard ware of this value is such that one
more than the value programmed here is used
R/W 0x3
SJW
[7:6]
(Re)Synchronisation Jump Width
0x0-0x3: Valid programmed values are 0-3. The actual
interpretation by the hardware of this value is such that one
more than the value programmed here is used.
R/W 0
BRP
[5:0]
Baud Rate Prescaler
0x01-0x3F: The value by which the oscillator frequency is
divided for generating the bit time quanta. The bit time is build
up from a multiple of these quanta. Valid values for the Baud
Rate Prescaler are [0..63]. The actual interpretation by the
hardware of this value is such that one more than the value
programmed here is used.
R/W 0x10
NOTE:
With a module clock CAN_CLK of 8 MHz, the reset value of 0x2301 configures the C_CAN for a bit rate of 500 kBit/s.
The registers are only writable if bits CCE and Init in the CAN Control Register are set.
Summary of Contents for S5PC100
