Hitachi SJ Series, User Manual

Page: 189 / 786

12-5-2
Chapter 12
Inverter Functions
12.5.2 Operation on operator keypad
• Want to make trial operation from the operator
keypad.
• Want to make operation from the operator keypad.
• The operator keypad is used to give a frequency
command.
• Use “Operation key” and “Stop key” to make and
stop operation, respectively.
• For operation using the operator keypad, the
operation direction can be changed by setting
RUN key direction selection [AA-12].
Parameters
• The output of the inverter requires not only an
operation command but also a frequency
command.
• If the forced operation 023 [F-OP] of the terminal
function is enabled, the command destination
specified in the [F-OP] function becomes effective
irrespective of the present setting.
Item Parameters Data Description
Operation
command
selection
[AA111] 02
Operation command from “Operation key”/”Stop key”
on the operator keypad.
RUN key
direction
selection
[AA-12]
00 Forward rotation command from the operator keypad.
01 Reverse rotation command from the operator keypad.
Output
terminal
function
[CC-01]~
[CC-07]
011
[REF] ON when an operation command can be given
from the operator keypad.
Ｑ
Ａ
！