Hitachi SJ Series, User Manual

Page: 147 / 786

Chapter 11
11.2.1
•
•
(Example)
•
*)
Chapter 11
Frequency command 1
11.2.1 Setting the operator keypad
• On the parameter setting screen, select [AA101] =
07 frequency command.
• Frequency command can be changed using (1)
parameter [FA
or (2) parameter setting [Ab110].
(Example) For [FA
Frequency command
• Frequency command can be changed by using
UP/DOWN keys to set the main speed command
[FA-01] to a desired setting.
Parameter
Parameter
[AA101]
[FA-01]*)
[Ab110]*)
*) If [AA101] is set to 07, a change made to either
[FA-01] or [Ab110] parameter will be reflected to the
other parameter. If [FA
change is not reflected, it means that the command
destination hasn’t been
terminal functions or setting of [AA101].
You need to set the frequency value other than
0.00.
▼
Back
RUN
FW
Output Frequency
FA-01
Chapter 11
Frequency command 1
Setting the operator keypad
On the parameter setting screen, select [AA101] =
07 frequency command.
Frequency command can be changed using (1)
parameter [FA-01] (if the operator keypad is used);
or (2) parameter setting [Ab110].
For [FA-01]
Frequency command
Frequency command can be changed by using
UP/DOWN keys to set the main speed command
01] to a desired setting.
Setting function
Frequency setting by setting on
the operator keypad
Main speed command
0th speed of the 1st
If [AA101] is set to 07, a change made to either
01] or [Ab110] parameter will be reflected to the
other parameter. If [FA-
change is not reflected, it means that the command
destination hasn’t been
terminal functions or setting of [AA101].
You need to set the frequency value other than
46.49Hz oFW
Output Frequency
01
Frequency command 1
Setting the operator keypad
On the parameter setting screen, select [AA101] =
07 frequency command.
Frequency command can be changed using (1)
01] (if the operator keypad is used);
or (2) parameter setting [Ab110].
Frequency command can be changed by using
UP/DOWN keys to set the main speed command
01] to a desired setting.
Setting function
Frequency setting by setting on
the operator keypad
Main speed command
0th speed of the 1st multi-
speed
If [AA101] is set to 07, a change made to either
01] or [Ab110] parameter will be reflected to the
-01] cannot be changed or a
change is not reflected, it means that the command
destination hasn’t been the operator keypad due to
terminal functions or setting of [AA101].
You need to set the frequency value other than
46.49Hz
M1
Output Frequency
29.51 Hz
46.4
[0.00-
Setting the operator keypad
On the parameter setting screen, select [AA101] =
Frequency command can be changed using (1)
01] (if the operator keypad is used);
Frequency command can be changed by using
UP/DOWN keys to set the main speed command
Set value
Frequency setting by setting on
07
Main speed command 0.00Hz
-step
0.00Hz
If [AA101] is set to 07, a change made to either
01] or [Ab110] parameter will be reflected to the
01] cannot be changed or a
change is not reflected, it means that the command
the operator keypad due to
terminal functions or setting of [AA101].
You need to set the frequency value other than
Save
H03
29.51 Hz
46.49 Hz
-60.00]
11-2
On the parameter setting screen, select [AA101] =
Frequency command can be changed using (1)
01] (if the operator keypad is used);
Frequency command can be changed by using
UP/DOWN keys to set the main speed command
Set value
07
0.00Hz
0.00Hz
If [AA101] is set to 07, a change made to either
01] or [Ab110] parameter will be reflected to the
01] cannot be changed or a
change is not reflected, it means that the command
the operator keypad due to
You need to set the frequency value other than
Operation command 1
11.2.2
• On the parameter setting screen, select 02 for
[AA111].
Operation and stop commands
You can operate or stop by pressing RUN key or
STOP key on the operator keypad.
Parameter
Parameter
[AA111]
▼
Operation command 1
11.2.2 Operating on operator keypad
On the parameter setting screen, select 02 for
[AA111].
Operation and stop commands
You can operate or stop by pressing RUN key or
STOP key on the operator keypad.
Parameter
Parameter
[AA111]
Operates with RUN key on the
▼
RUN key (to operate)
Operation command 1
Operating on operator keypad
On the parameter setting screen, select 02 for
Operation and stop commands
You can operate or stop by pressing RUN key or
STOP key on the operator keypad.
Setting function
Operates with RUN key on the
operator keypad.
RUN key (to operate)
Operating on operator keypad
On the parameter setting screen, select 02 for
Operation and stop commands
You can operate or stop by pressing RUN key or
STOP key on the operator keypad.
Setting function
Operates with RUN key on the
operator keypad.
STOP key (to stop)
Operating on operator keypad
On the parameter setting screen, select 02 for
You can operate or stop by pressing RUN key or
Set value
Operates with RUN key on the
02
STOP key (to stop)
Set value
STOP key (to stop)