Hitachi SJ Series, User Manual

Page: 114 / 786

9.6.2
・
・
・
*
Chapter 9
9.6.2 WRITE
・
I want to write data to migrate settings to another
inverter.
・
I want to rewrite data that was read.
・
On the screen that is displayed upon power
press the F1(
"M01". Then, select the R/W function by pressing
the SEL(O) key.
* If you cannot write data, see "9.13.1 Disabling
Data R/W".
Set-up procedure
Q
▼
R/W Function
01 READ
02 WRITE
R/W Function>Type of Write Data
01 Parameter Data
02 Parameter Data + EzSQ
. . > . . > Write Data
Parameter Data
1.
Chapter 9
WRITE Function
I want to write data to migrate settings to another
I want to rewrite data that was read.
On the screen that is displayed upon power
press the F1(1) key to navigate to the menu screen
"M01". Then, select the R/W function by pressing
the SEL(O) key.
If you cannot write data, see "9.13.1 Disabling
Data R/W".
up procedure
R/W Function
01 READ
02 WRITE
R/W Function>Type of Write Data
01 Parameter Data
02 Parameter Data + EzSQ
. . > . . > Write Data
Parameter Data
1. 16/07/01 11:55 SJ
unction
I want to write data to migrate settings to another
I want to rewrite data that was read.
On the screen that is displayed upon power
key to navigate to the menu screen
"M01". Then, select the R/W function by pressing
If you cannot write data, see "9.13.1 Disabling
R/W Function
R/W Function>Type of Write Data
01 Parameter Data
02 Parameter Data + EzSQ
. . > . . > Write Data
Parameter Data
16/07/01 11:55 SJ-P1 98 1
I want to write data to migrate settings to another
I want to rewrite data that was read.
On the screen that is displayed upon power
key to navigate to the menu screen
"M01". Then, select the R/W function by pressing
If you cannot write data, see "9.13.1 Disabling
R/W Function>Type of Write Data
02 Parameter Data + EzSQ
P1 98 1
9-19
I want to write data to migrate settings to another
On the screen that is displayed upon power-on,
key to navigate to the menu screen
"M01". Then, select the R/W function by pressing
・
With R/W function, you can read and write data.
Action
6.2.1 Select the write function by using the up and
down (
SEL(O) key.
6.2.2 Select data to be written by using the up and
down (
pressing the
6.2.3 In accordance with the instruction shown on the
screen, select data to be written to the inverter,
and press
completion screen appears, the procedure is
complete.
Display description:
No. Date Time Inverter name: No. Data type
* Inverter name: No. is unique to SJ
* Data type is 1: Only parameters or 2:
* To display date and time, you need to configure clock settings from
System settings.
A
With R/W function, you can read and write data.
Action
Select the write function by using the up and
down (
) keys. Then, confirm by pressing the
SEL(O) key.
Select data to be written by using the up and
down (
) keys
pressing the
In accordance with the instruction shown on the
screen, select data to be written to the inverter,
and press the F2(2) key to start writing. When the
completion screen appears, the procedure is
complete.
Display description:
No. Date Time Inverter name: No. Data type
Inverter name: No. is unique to SJ
Data type is 1: Only parameters or 2:
To display date and time, you need to configure clock settings from
System settings.
A
Home oFW
Menu
01 Scroll mode
02 R/W function
03 System settings
STOP
Operating Instructions
With R/W function, you can read and write data.
Select the write function by using the up and
) keys. Then, confirm by pressing the
To 6.2.2
Select data to be written by using the up and
) keys. Then, confirm the
pressing the SEL(O) key.
In accordance with the instruction shown on the
screen, select data to be written to the inverter,
the F2(2) key to start writing. When the
completion screen appears, the procedure is
Display description:
No. Date Time Inverter name: No. Data type
Inverter name: No. is unique to SJ-P1.
Data type is 1: Only parameters or 2:
To display date and time, you need to configure clock settings from
46.49Hz oFW
Scroll mode
R/W function
System settings
Operating Instructions
With R/W function, you can read and write data.
Select the write function by using the up and
) keys. Then, confirm by pressing the
Select data to be written by using the up and
. Then, confirm the function by
SEL(O) key. To 6.2.3
In accordance with the instruction shown on the
screen, select data to be written to the inverter,
the F2(2) key to start writing. When the
completion screen appears, the procedure is
No. Date Time Inverter name: No. Data type
P1.
Data type is 1: Only parameters or 2: ParEzSQ.
To display date and time, you need to configure clock settings from
----
46.49Hz
M1
M01
Operating Instructions
With R/W function, you can read and write data.
Select the write function by using the up and
) keys. Then, confirm by pressing the
Select data to be written by using the up and
function by
In accordance with the instruction shown on the
screen, select data to be written to the inverter,
the F2(2) key to start writing. When the
completion screen appears, the procedure is
No. Date Time Inverter name: No. Data type
ParEzSQ.
To display date and time, you need to configure clock settings from
----
M01
Operating Instructions
the F2(2) key to start writing. When the
To display date and time, you need to configure clock settings from