Hitachi SJ Series, User Manual

Page: 718 / 786

Appendix 1-7
Appendix 1 List of Parameters

Monitors and parameters for changing the current
commands *1)
*1) FA parameter indicates the current command
value, and automatically displays data of the
command destination that is being adopted.
Example 1: If the command destination is the
operator keypad, it can be changed
using the arrow keys.
Example 2: If the command destination is the
analog input Ai1, it can be changed
by changing input to the terminal
[Ai1].
Code Name Data range Note Page
FA-01 Main speed command monitor 0.00~590.00 (Hz) 13-3
FA-02 Auxiliary speed command monitor
-590.00 - 590.00 (Hz) (for monitoring)
0.00 - 590.00 (Hz) (for setting)
13-3
FA-10 Acceleration time monitor 0.00~3600.00 (s) 13-6
FA-12 Deceleration time monitor 0.00~3600.00 (s) 13-6
FA-15 Torque command monitor -500.0~500.0 (%) 12-11-15
FA-16 Torque bias command monitor -500.0~500.0 (%) 12-11-12
FA-20 Position command monitor
When [AA121]≠10 or [AA123]≠03
-268268435455 (pls)/
When [AA121]=10 and [AA123]=03
-10731073741823 (pls)
12-17-30
FA-30 PID1 target value 1
0.00~100.00 (%)
(adjustable in [AH-04][AH-05][AH-06])
12-10-7 FA-32 PID1 target value 2
FA-34 PID1 target value 3
FA-36 PID2 target value
0.00~100.00 (%)
(adjustable in [AJ-04][AJ-05][AJ-06])
12-10-20
FA-38 PID3 target value
0.00~100.00 (%)
(adjustable in [AJ-24][AJ-25][AJ-26])
12-10-21
FA-40 PID4 target value
0.00~100.00 (%)
(adjustable in [AJ-44][AJ-45][AJ-46])
12-10-21