Hitachi SJ Series, User Manual

Page: 749 / 786

Appendix 1-38
Appendix 1 List of Parameters
<List of output terminal functions>
Function
No.
Abbreviation Function name Page
000 no Without allocation -
001 RUN During operation
002 FA1
When the constant speed is
attained
003 FA2
Equal to or above the set
frequency
004 FA3 Set frequency only
005 FA4
Equal to or above the set
frequency 2
006 FA5 Set frequency only 2
007 IRDY Operation ready completion
008 FWR
During normal rotation
operation
009 RVR
During reverse rotation
operation
010 FREF Frequency command panel
011 REF Operation command panel
012 SETM
Second control under
selection
12-17-1
016 OPO Optional output 14-41
017 AL Alarm signal
018 MJA Severe failure signal
019 OTQ Excessive torque 12-11-9
020 IP
During instantaneous power
failure
021 UV Under insufficient voltage
022 TRQ During torque limitation 12-11-8
023 IPS
During power failure
deceleration
12-13-17
024 RNT RUN time elapsed
025 ONT Power ON time elapsed
026 THM Electronic thermal warning
027 THC Electronic thermal warning
029 WAC
Capacitor life advance
notice
030 WAF Fan life advance notice
031 FR Operation command signal
032 OHF
Cooling fin heating advance
notice
033 LOC Low current signal
034 LOC2 Low current signal 2
035 OL Overload advance notice
036 OL2 Overload advance notice 2
037 BRK Brake release 12-17-5
038 BER Brake abnormality 12-17-5
039 CON Contactor control 12-17-10
040 ZS 0 Hz detection signal
041 DSE Excessive speed deviation 12-16-11
042 PDD
Excessive positional
deviation
12-17-21
043 POK Positioning completed 12-17-22
044 PCMP
Pulse count compare-match
output
045 OD PID excessive deviation 12-10-28
046 FBV PID feedback comparison 12-10-29
047 OD2 PID2 excessive deviation 12-10-28
048 FBV2 PID2 feedback comparison 12-10-29
Function
No.
Abbreviation Function name Page
049 NDc
Communication
disconnection
14-5
050 Ai1Dc Analog disconnection Ai1
051 Ai2Dc Analog disconnection Ai2
052 Ai3Dc Analog disconnection Ai3
053 Ai4Dc Analog disconnection Ai4
054 Ai5Dc Analog disconnection Ai5
055 Ai6Dc Analog disconnection Ai6
056 WCAi1 Window comparator Ai1
057 WCAi2 Window comparator Ai2
058 WCAi3 Window comparator Ai3
059 WCAi4 Window comparator Ai4
060 WCAi5 Window comparator Ai5
061 WCAi6 Window comparator Ai6
062 LOG1 Result of logical operation 1
063 LOG2 Result of logical operation 2
064 LOG3 Result of logical operation 3
065 LOG4 Result of logical operation 4
066 LOG5 Result of logical operation 5
067 LOG6 Result of logical operation 6
068 LOG7 Result of logical operation 7
069 MO1 General purpose output 1
16-6
070 MO2 General purpose output 2
071 MO3 General purpose output 3
072 MO4 General purpose output 4
073 MO5 General purpose output 5
074 MO6 General purpose output 6
075 MO7 General purpose output 7
076 EMFC
Forced operation in process
signal
12-17-13
077 EMBP During-bypass-mode signal 12-17-15
078 WFT
Trace trigger stand-by
signal
16-8
079 TRA During-tracing signal 16-8
080 LBK
Operation panel battery
insufficient
9-38
081 OVS
Excessive voltage of
accepted power
084 AC0 Alarm code bit 0
085 AC1 Alarm code bit 1
086 AC2 Alarm code bit 2
087 AC3 Alarm code bit 3
089 OD3 PID3 excessive deviation 12-10-28
090 FBV3 PID3 feedback comparison 12-10-29
091 OD4 PID4 excessive deviation 12-10-28
092 FBV4 PID4 feedback comparison 12-10-29
093 SSE PID soft start abnormality 12-10-16