Hitachi SJ Series, User Manual

Page: 5 / 786

1.4.2
Prohibited
Prohibited
Chapter 1
1.4.2 Precautions for installation
Fire
Prohibited
Do
Injury
Prohibited
Chapter 1
Precautions for installation
Otherwise, you run the
Do not place flammable materials near the
installed inverter.
Prevent foreign matter (e.g., cut pieces of wire,
sputtering welding materials, iron chips, wire,
and dust) from entering the inverter.
Install the inverter on a non
e.g., metal.
Install the inverter in a well
site not exposed to direct sunlight. Avoid places
where the inverter is exposed to high
temperature, high humidity, condensation, dust,
explosive gases, corrosive gases, flammable
gases, grinding fluid mist, hydrogen sulfide or
salt water.
Otherwise, you run the risk of injury.
Do not install and operate the inverter if it is
damaged or parts are missing.
Precautions for installation
Otherwise, you run the risk of fire.
Do not place flammable materials near the
installed inverter.
Prevent foreign matter (e.g., cut pieces of wire,
sputtering welding materials, iron chips, wire,
and dust) from entering the inverter.
Install the inverter on a non-
Install the inverter in a well-ventilated indoor
site not exposed to direct sunlight. Avoid places
where the inverter is exposed to high
temperature, high humidity, condensation, dust,
gases, corrosive gases, flammable
gases, grinding fluid mist, hydrogen sulfide or
Otherwise, you run the risk of injury.
Do not install and operate the inverter if it is
damaged or parts are missing.
risk of fire.
Do not place flammable materials near the
Prevent foreign matter (e.g., cut pieces of wire,
sputtering welding materials, iron chips, wire,
and dust) from entering the inverter.
-flammable surface,
ventilated indoor
site not exposed to direct sunlight. Avoid places
where the inverter is exposed to high
temperature, high humidity, condensation, dust,
gases, corrosive gases, flammable
gases, grinding fluid mist, hydrogen sulfide or
Otherwise, you run the risk of injury.
Do not install and operate the inverter if it is
damaged or parts are missing.
Warning
1-4
Do not place flammable materials near the
Prevent foreign matter (e.g., cut pieces of wire,
sputtering welding materials, iron chips, wire,
flammable surface,
ventilated indoor
site not exposed to direct sunlight. Avoid places
temperature, high humidity, condensation, dust,
gases, corrosive gases, flammable
gases, grinding fluid mist, hydrogen sulfide or
Do not install and operate the inverter if it is
Fall
Injury
Prohibited
Do
Failure
Prohibited
Do
Warning
Fall
Injury
Otherwise, you run the risk of injury due
to the
Prohibited
- When carrying the inverter, do not hold its
cover parts.
Do
Install the inverter on a structure able to bear
the weight
Install the inverter on a vertical wall that is free
of vibrations.
Failure
Otherwise, the inverter may fail.
Prohibited
The inverter is precision equipment. Do not
allow it to fall or be subject to
Also do not step on it, or place a heavy load on
it.
Avoid places where static electricity
discharges often occur (for example, on a rug)
for the operation of the product.
Do
In order to discharge static electricity from
your body, touch a
before starting the operation.
Warning
Safety Instructions/Risks
Otherwise, you run the risk of injury due
to the fall of an inverter
When carrying the inverter, do not hold its
cover parts.
Install the inverter on a structure able to bear
the weight specified in the User’s Guide.
Install the inverter on a vertical wall that is free
of vibrations.
Otherwise, the inverter may fail.
The inverter is precision equipment. Do not
allow it to fall or be subject to
Also do not step on it, or place a heavy load on
Avoid places where static electricity
discharges often occur (for example, on a rug)
for the operation of the product.
In order to discharge static electricity from
your body, touch a
before starting the operation.
Safety Instructions/Risks
Otherwise, you run the risk of injury due
fall of an inverter.
When carrying the inverter, do not hold its
Install the inverter on a structure able to bear
specified in the User’s Guide.
Install the inverter on a vertical wall that is free
Otherwise, the inverter may fail.
The inverter is precision equipment. Do not
allow it to fall or be subject to high impacts.
Also do not step on it, or place a heavy load on
Avoid places where static electricity
discharges often occur (for example, on a rug)
for the operation of the product.
In order to discharge static electricity from
your body, touch a safe metal surface first
before starting the operation.
Safety Instructions/Risks
Otherwise, you run the risk of injury due
When carrying the inverter, do not hold its
Install the inverter on a structure able to bear
specified in the User’s Guide.
Install the inverter on a vertical wall that is free
Otherwise, the inverter may fail.
The inverter is precision equipment. Do not
high impacts.
Also do not step on it, or place a heavy load on
Avoid places where static electricity
discharges often occur (for example, on a rug)
for the operation of the product.
In order to discharge static electricity from
safe metal surface first
Safety Instructions/Risks
Otherwise, you run the risk of injury due
Install the inverter on a structure able to bear
Install the inverter on a vertical wall that is free
The inverter is precision equipment. Do not
Also do not step on it, or place a heavy load on
discharges often occur (for example, on a rug)