Hitachi SJ Series, User Manual

Page: 153 / 786

12-1-2
Chapter 12 Inverter Functions
■
Search a function to use.
• Show the content of this chapter.
Chapter Item Page
12.2 Basic setting of inverter 12-2-1
12.3 Basic setting of motor 12-3-1
12.4 Select a frequency
command. 12-4-1
12.5 Select an operation
command. 12-5-1
12.6 Limit frequency and
operation commands. 12-6-1
12.7 Thermal protection of motor 12-7-1
12.8 Use a function to accelerate
or decelerate the motor. 12-8-1
12.9 Select a motor control
method suitable for motor
and load. 12-9-1
12.10 Process control suitable for
system 12-10-1
12.11 Torque control suitable for
load 12-11-1
12.12 Adjust motor sound, noise,
and inverter heat. 12-12-1
12.13 Use the tripless function. 12-13-1
12.14 Change the way of start. 12-14-1
Chapter Item Page
12.15 Change the way of stop. 12-15-1
12.16 Use a system protection
function. 12-16-1
12.17 Switch the operation mode
for operation. 12-17-1
12.18 Control the cooling fan of the
inverter. 12-18-1
12.19 Output a warning signal to
the terminal. 12-19-1
12.20 Output operation status to
the terminal. 12-20-1
12.21 Compare output frequency
and output it to the terminal. 12-21-1
12.22 Detect disconnection or
out-of-range of analogue
input. 12-22-1
12.23 Combine output signals and
output them to the terminal. 12-23-1
12.24 What can be done with
signal output from external 12-24-1
12.25 What can be done with
signal output to external 12-25-1
Ａ