Hitachi SJ Series, User Manual

Page: 49 / 786

Procedures:
(1)
Chapter 6
For the use of
low duty (VLD), follow the installation
procedures shown in the drawings below.
Procedures:
(1) Tighten (four) spacers to the (upper and lower) brackets
as shown in Figure 1 using (four) M3×8 screws included
in the package.
◆
Notes for P1
Step (2)
Step (2)
Screws prepared
on your own
Screws prepared
on your own
Chapter 6
For the use of P1
low duty (VLD), follow the installation
procedures shown in the drawings below.
Tighten (four) spacers to the (upper and lower) brackets
as shown in Figure 1 using (four) M3×8 screws included
in the package. (Tightening torque 0.6 to 0.8 Nm)
Notes for P1-01240
Figure How to install
Step
Screws prepared
on your own
Screws prepared
on your own
P1-01240-L(P1
low duty (VLD), follow the installation
procedures shown in the drawings below.
Tighten (four) spacers to the (upper and lower) brackets
as shown in Figure 1 using (four) M3×8 screws included
(Tightening torque 0.6 to 0.8 Nm)
01240-L (P1-220L)
Figure How to install
Step (1)
M3×8 screw
L(P1-220L) at very
low duty (VLD), follow the installation
procedures shown in the drawings below.
Tighten (four) spacers to the (upper and lower) brackets
as shown in Figure 1 using (four) M3×8 screws included
(Tightening torque 0.6 to 0.8 Nm)
220L)
Figure How to install
M3×8 screw
M3×8 screw
6-10
220L) at very Change [Ub
Tighten (four) spacers to the (upper and lower) brackets
as shown in Figure 1 using (four) M3×8 screws included (2)
Spacer
Step (1)
Step (1)
Spacer
M3×8 screw
Change [Ub-03] to 00 to set VLD.
(2) Install P1-01240
screws prepared on your own.
Figure Front and right side diagrams
03] to 00 to set VLD.
01240-L(P1-220L) on the wall using four
screws prepared on your own.
Wall
Figure Front and right side diagrams
Installation
03] to 00 to set VLD.
220L) on the wall using four
screws prepared on your own.
Wall
Figure Front and right side diagrams
Installation
220L) on the wall using four
W
a
ll
Figure Front and right side diagrams
Installation