Hitachi SJ Series, User Manual

Page: 416 / 786

12-20-1
Chapter 12 Inverter Function
12.20 How to output the operating
status to a terminal
12.20.1 Outputting a signal during operation
(output)
• I want to detect the output status of the inverter
and convey to the system.
• Assign the output terminal function 001 [RUN]
running signal to one of [CC-01] to [CC-07] that
corresponds to the output terminal and output the
signal.
• The timing chart is as follows.
Parameter
• The signal becomes ON not only when the motor
is operating at normal rotation but also when a
voltage is output to the motor as a function such as
DC breaking.
• The signal [RUN] will not be output when the
inverter is waiting for a retry or DC breaking.
Item Parameter Data Description
Output terminal function
selection 11-15
[CC-01]~[CC-05]
001
The signal [RUN] is output to the output
terminal assigned.
Relay output terminal
function selection 16A-16C
[CC-06]
Relay output terminal
function selection
AL1-AL0/AL2-AL0
[CC-07]
Ｑ
Ａ
！
Output
frequency
Output signal
[RUN]
Operation
command [FW]