Hitachi SJ Series, User Manual

Page: 763 / 786

Appendix 1-52
Appendix 1 List of Parameters

Parameter mode (code o)
*1) For details, refer to the instruction manual provided
together with the each optional cassette.
*1) For details, refer to the instruction manual provided
together with the each optional cassette.
Code Name Data range Initial value Note Page
oA-10
Operation selection when option error
occurs (slot 1)
00 (Error)/01 (Continue operation) 00 *1)
oA-11
Communication monitoring timer
setting (slot1)
0.00~100.00 (s) 1.00 *1)
oA-12
Operation setting at the time of
communication error (slot1)
00 (Error)/
01 (Trip after deceleration stop)/
02 (Ignore)/03 (Free run)/
04 (Deceleration stop)
01 *1)
oA-13
Selection of operation command
behavior at start (slot 1) 00 (Operation command disabled)/
01 (Operation command enabled)
00 *1)
oA-20
Operation selection when option error
occurs (slot 2)
00 (Error)/01 (Continue operation) 00 *1)
oA-21
Communication monitoring timer
setting (slot 2)
0.00~100.00 (s) 1.00 *1)
oA-22
Operation setting at the time of
communication error (slot 2)
00 (Error)/
01 (Trip after deceleration stop)/
02 (Ignore)/03 (Free run)/
04 (Deceleration stop)
01 *1)
oA-23
Selection of operation command
behavior at start (slot 2) 00 (Operation command disabled)/
01 (Operation command enabled)
00 *1)
oA-30
Operation selection when option error
occurs (slot 3)
00 (Error)/01 (Continue operation) 00 *1)
oA-31
Communication monitoring timer
setting (slot 3)
0.00~100.00 (s) 1.00 *1)
oA-32
Operation setting at the time of
communication error (slot 3)
00 (Error)/
01 (Trip after deceleration stop)/
02 (Ignore)/03 (Free run)/
04 (Deceleration stop)
01 *1)
oA-33
Selection of operation command
behavior at start (slot 3) 00 (Operation command disabled)/
01 (Operation command enabled)
00 *1)
Code Name Data range Initial value Note Page
ob-01 Encoder constant set-up (option) 32~65535 (pls) 1024 *1)
ob-02
Encoder phase sequence selection
(option) 00 (Phase-A is leading)/
01 (Phase-B is leading)
00 *1)
ob-03 Motor gear ratio's numerator (option) 1~10000 1 *1)
ob-04 Motor gear ratio's denominator (option) 1~10000 1 *1)
ob-10
Pulse string input SA/SB (option)
detection target selection 00 (Command)/
01 (Pulse string position command)
00 *1)
ob-11
Pulse string input (option) mode
selection
00 (90° phase difference)/
01 (forward/reverse rotation command
and rotation direction)/
02 (forward/reverse rotation pulse string)
01 *1)
ob-12 Pulse string input (option) scale 0.05~200.0 (kHz) 25.00 *1)
ob-13
Pulse string input (option) filter time
constant
0.01~2.00 (s) 0.10 *1)
ob-14 Pulse string input (option) bias size -100.0~100.0 (%) 0.0 *1)
ob-15
Pulse string input (option) upper
detection limit
0.0~100.0 (%) 100.0 *1)
ob-16
Pulse string input (option) lower
detection limit
0.0~100.0 (%) 0.0 *1)