Hitachi SJ Series, User Manual

Page: 453 / 786

12-25-6
Chapter 12
About the inverter function
12.25.3 Delaying and retaining output
signals
• I want to delay the response to an output signal.
• I want to reduce fluctuation of signal as much as
possible.
• You can set an on-delay/off-delay time per output
terminal.
• You can make a setting per output terminal. For the
correspondence between output terminals and
parameters, please refer to the table shown on the
right.
Parameters
Example) Operation of Output terminal 11
• All output signals immediately turn ON/OFF upon a
condition is satisfied. Chattering could occur
depending on a selected signal. This function is
available for retaining/delaying such a signal.
Item Parameter Data Description
Output on-delay
time
[CC-20]/[CC-22]/
[CC-24]/[CC-26]/
[CC-28]/[CC-30]/
[CC-32]
0.00~100.00(s) Sets an on-delay time.
Output off-delay
time
[CC-21]/[CC-23]/
[CC-25]/[CC-27]/
[CC-29]/[CC-31]/
[CC-33]
0.00~100.00(s) Sets an off-delay time.
Output
terminals
On-delay time Off-delay time
11 [CC-20] [CC-21]
12 [CC-22] [CC-23]
13 [CC-24] [CC-25]
14 [CC-26] [CC-27]
15 [CC-28] [CC-29]
16A-16C [CC-30] [CC-31]
AL1-AL0/
AL2-AL0
[CC-32] [CC-33]
Ｑ
Ａ
！
Output of
selected function
Operation of
Output terminal
11
[CC-20] [CC-21]
ON
OFF
OFF
ON