Hitachi SJ Series, User Manual

Page: 746 / 786

Appendix 1-35
Appendix 1 List of Parameters
Code Name Data range Initial value Note Page
CA-60 FUP/FDN target selection 00 (Frequency command)/01 (PID1) 00
CA-61 FUP/FDN memory selection 00 (Not save)/01 (Save) 00
CA-62 FUP/FDN UDC mode selection 00 (0Hz)/01 (saved data) 00
CA-64
Acceleration time for FUP/FDN
functions
0.00~3600.00 (s) 30.00
CA-66
Deceleration time for FUP/FDN
functions
0.00~3600.00 (s) 30.00
CA-70 [F-OP] frequency command
01 (Ai1 terminal input)/
02 (Ai2 terminal input)/
03 (Ai3 terminal input)/
04 (Ai4 terminal input)/
05 (Ai5 terminal input)/
06 (Ai6 terminal input)/
07 (Parameter setting)/
08 (RS 485)/09 (Option 1)/
10 (Option 2)/11 (Option 3)/
12 (Pulse string input: main unit)/
13 (Pulse string input: P1-FB)/
14 (Program function)/
15 (PID calculation)/16 (QOP-VR)
01
CA-71 [F-OP] Operation command
00 ([FW]/[RV] terminal)/01 (3 wire)/
02 (RUN key on operator keypad)/
03 (RS485)/04 (Option 1)/
05 (Option 2)/06 (Option 3)/
00
CA-72 Reset selection
00 (On to Release Trip)/
01 (Off to Release Trip)/
02 (On to Release at Trip)/
03 (Of to Release at Trip)
00
CA-81 Encoder constant set-up 32~65535 (pls) 1024 12-9-35
CA-82 Encoder phase sequence selection
00 (Phase-A is leading)/
01 (Phase-B is leading)
00
12-9-35
CA-83 Motor gear ratio's numerator 1~10000 1 12-9-35
CA-84 Motor gear ratio's denominator 1~10000 1 12-9-35
CA-90
Pulse string input (main body)
detection target selection
00 (Pulse count)/
01 (Frequency command)/
02 (Speed feedback)/03 (Pulse count)
00 12-9-35
CA-91
Pulse string input (main body) mode
selection
00 (90° phase difference)/
01 (forward/reverse rotation command
and rotation direction)/
02 (forward/reverse rotation pulse string)
00 12-9-35
CA-92
Pulse string frequency (main body)
scale
0.05~32.00 (kHz) 25.00
CA-93
Pulse string frequency (main body)
filter time constant
0.01~2.00 (s) 0.10
CA-94
Pulse string frequency (main body)
bias size
-100.0~100.0 (%) 0.0
CA-95
Pulse string frequency (main body)
upper detection limit
0.0~100.0 (%) 100.0
CA-96
Pulse string frequency
(main body) lower detection limit
0.0~100.0 (%) 0.0
CA-97
Pulse count compare-match output
ON level
0~65535 0
CA-98
Pulse count compare-match output
OFF level
0~65535 0
CA-99
Maximum value for pulse count
compare-match output
0~65535 0