Hitachi SJ Series, User Manual

Page: 140 / 786

Chapter 10 Chapter 10
Setting item
③
④
Chapter 10
Setting item
Menu
oFW
STOP
Output Frequency
AA111
First operation command
02: RUN key on operator keypad
Menu
oFW
STOP
Output Frequency
bC110
First electronic thermal level
60.00Hz
oFW
Output Frequency
First operation command
02: RUN key on operator keypad
60.00Hz
oFW
Output Frequency
First electronic thermal level
Option
60.00Hz
M1
H03
0.00 Hz
First operation command selection
02: RUN key on operator keypad
Option
60.00Hz
M1
H03
0.00 Hz
First electronic thermal level
25.0 A
[0.0-75.0]
10-5
Note
③
Operation command destination selection [AA111]
When the operation command destination is set to
“02: RUN key on operator keypad”, “oFW” will be
shown on operator keypad at the bottom in the
area
※
When the destination is set to reverse, “oRV” will
be shown.
④
Setting the electronic thermal level of motor
[bc110]
Set the level so that it does not exceed the rated
current of motor.
※
The electronic thermal for protec
works automatically.
Option
H03
Option
H03
Note
Operation command destination selection [AA111]
When the operation command destination is set to
“02: RUN key on operator keypad”, “oFW” will be
shown on operator keypad at the bottom in the
area for displaying function of RUN key.
When the destination is set to reverse, “oRV” will
be shown.
Setting the electronic thermal level of motor
[bc110]
Set the level so that it does not exceed the rated
current of motor.
Note that the motor may be burned if the
electronic thermal level is not appropriately set.
The electronic thermal for protec
works automatically.
Operation command destination selection [AA111]
When the operation command destination is set to
“02: RUN key on operator keypad”, “oFW” will be
shown on operator keypad at the bottom in the
for displaying function of RUN key.
When the destination is set to reverse, “oRV” will
Setting the electronic thermal level of motor
Set the level so that it does not exceed the rated
current of motor.
Note that the motor may be burned if the
electronic thermal level is not appropriately set.
The electronic thermal for protec
works automatically.
Operation command destination selection [AA111]
When the operation command destination is set to
“02: RUN key on operator keypad”, “oFW” will be
shown on operator keypad at the bottom in the
for displaying function of RUN key.
When the destination is set to reverse, “oRV” will
Setting the electronic thermal level of motor
Set the level so that it does not exceed the rated
Note that the motor may be burned if the
electronic thermal level is not appropriately set.
The electronic thermal for protecting the inverter
Test Run
Operation command destination selection [AA111]
When the operation command destination is set to
“02: RUN key on operator keypad”, “oFW” will be
shown on operator keypad at the bottom in the
for displaying function of RUN key.
When the destination is set to reverse, “oRV” will
Setting the electronic thermal level of motor
Set the level so that it does not exceed the rated
Note that the motor may be burned if the
electronic thermal level is not appropriately set.
ting the inverter
Run
Operation command destination selection [AA111]
When the operation command destination is set to
“02: RUN key on operator keypad”, “oFW” will be
When the destination is set to reverse, “oRV” will
electronic thermal level is not appropriately set.
ting the inverter